Services

GEOTECHNICAL ENGINEERING

  • Phase I Environmental Assessments
  • Drinking Water Source Protection Plans (DWSP)
  • Mechanistic Pavement Design
  • Highway Embankment/Bridge Investigation
  • Foundation Investigations
  • Distress Evaluations
  • Municipal, civil and water resource studies
  • Slope Stability Analysis

CONSTRUCTION MATERIALS TESTING AND INSPECTION

  • ACI/ICBO/NICET Certified – soils, concrete, masonry and asphalt
  • Project Quality Control testing and onsite inspection
  • Cast in place concrete sampling and witness Masonry, mortar and grout continuous inspection – laboratory and field
  • Bolts installed in concrete
  • Reinforcing steel and post tensioned steel Piling, drilled piers and caissons Shotcrete
  • Special grading, excavation and filling
  • Concrete Batch Plant verification audits
  • Bituminous mix designs – Marshall and SHRP methods

SPECIAL INSPECTIONS

  • Reinforced Concrete
  • Masonry
  • Structural Steel
  • High Strength Bolts Welding
  • Epoxy EIFS (exterior insulation finishing system)
  • Fireproofing
  • Post Tension Concrete
  • Pre Cast Concrete

SWPPP

  • Writing
  • Consulting
  • Inspections

VIBRATION MONITORING

  • Pre-construction/post-construction condition surveys
  • Blast Monitoring
  • Construction Vibration Monitoring
  • Latest Instantel Instruments
  • Projects throughout Utah, Northern Arizona and Nevada

ASBESTOS INVESTIGATIONS

  • Survey site for Asbestos Containing Materials (ACM’s)
  • Identify ACM’s in accordance with EPA AHERA protocols
  • Comprehensive report provided by licensed Asbestos Inspector
  • Clearance Inspections after removal

LABORATORY SERVICES

  • Polishing (AASHTO T288/289)
  • Carbonates
  • Lightweight Particles
  • Los Angeles Abrasion Resistance Test
  • Organic Impurities
  • Sand Equivalent
  • Sodium or Magnesium Sulfate Soundness
  • Specific Gravity and Absorption
  • Unit Weight and Voids
  • Quantilative Analysis of Gypsum
  • Alkali-Silica Reactivity Accelerated Mortar Bar
  • Alkali-Silica Reactivity Mortar Bar
  • Alkali-Silica Reactivity Concrete Prism
  • Moisture/Density Relationship (Proctor)
  • Atterberg Limits (ASTM D-4318)
  • Gradation Analysis (ASTM C-136)
  • Moisture Content
  • Swell Consolidation
  • California Bearing Ratio
  • Water Soluble Sulfate
  • Asphalt Content/Gradation
  • Cores - Thickness/Density
  • Marshall Mix Design (ASTM D-1559)
  • Field Marshall (3Briquets) (ASTM D-1559) Rice Method, Specific Gravity
  • Tensile Strength Ratio
  • Asphalt Emulsion Viscosity
  • Asphalt Emulsion Residue Evaporation
  • Concrete Cylinders
  • Flexural Beams
  • Compressive Strength - Cores
  • Shrinkage
  • Block: Compression, Absorption, and Moisture
  • Brick: Compression, Absorption, and Modules of Rupture
  • Prism Compression
  • Compression, Hollow